ثابت الغاز - tradução para Inglês
Diclib.com
Dicionário ChatGPT
Digite uma palavra ou frase em qualquer idioma 👆
Idioma:

Tradução e análise de palavras por inteligência artificial ChatGPT

Nesta página você pode obter uma análise detalhada de uma palavra ou frase, produzida usando a melhor tecnologia de inteligência artificial até o momento:

  • como a palavra é usada
  • frequência de uso
  • é usado com mais frequência na fala oral ou escrita
  • opções de tradução de palavras
  • exemplos de uso (várias frases com tradução)
  • etimologia

ثابت الغاز - tradução para Inglês

FLAMMABLE GAS
Liquifed Petroleum Gas; Liquified Petroleum Gas; LP gas; Liquefied gases; Liquid petroleum gas; Liquefied Petroleum Gas; Liquified petroleum gas; LP Gas; الغاز النفطي المسال; Liquid petroleum; Liquid Petroleum Gas; LPG cooking gas; Dried oil gas; Liquefied petroleum gases; LPG cylinder; Petroleum gas
  • LPG minibuses in Hong Kong
  • Ford Falcon]] taxicab in Perth
  • abbr=on}} LPG cylinders in New Zealand used for domestic supply.
  • White bordered green diamond symbol used on LPG-powered vehicles in China
  • Tank cars in a Canadian train for carrying liquefied petroleum gas by rail.
  •  LPG Cylinders in [[India]]
  • Bottling LPG in the Marshall Islands for storage
  • LPG Storage spheres

ثابت الغاز      

gas constant

غاز طبيعي         
  • خطوط الأنابيب]] التي تمد [[أوروبا الغربية]] بالغاز الطبيعي
  • خريطة احتياطات الغاز الطبيعي في مختلف دول العالم
أحد مصادر الطاقة غير المتجددة
الغاز الطبيعي; Natural gas; الغاز الطبيعى
natural gas
مشبع         
صفحة توضيح لويكيميديا
مشبع; تشبع; الغاز المشبع

alcoholized

Wikipédia

Liquefied petroleum gas

Liquefied petroleum gas (LPG or LP gas) is a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, propylene, butylene, isobutane and n-butane.

LPG is used as a fuel gas in heating appliances, cooking equipment, and vehicles. It is increasingly used as an aerosol propellant and a refrigerant, replacing chlorofluorocarbons in an effort to reduce damage to the ozone layer. When specifically used as a vehicle fuel, it is often referred to as autogas or even just as gas.

Varieties of LPG that are bought and sold include mixes that are mostly propane (C
3
H
8
), mostly butane (C
4
H
10
), and, most commonly, mixes including both propane and butane. In the northern hemisphere winter, the mixes contain more propane, while in summer, they contain more butane. In the United States, mainly two grades of LPG are sold: commercial propane and HD-5. These specifications are published by the Gas Processors Association (GPA) and the American Society of Testing and Materials. Propane/butane blends are also listed in these specifications.

Propylene, butylenes and various other hydrocarbons are usually also present in small concentrations such as C2H6, CH4, and C3H8. HD-5 limits the amount of propylene that can be placed in LPG to 5% and is utilized as an autogas specification. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. The internationally recognized European Standard is EN 589. In the United States, tetrahydrothiophene (thiophane) or amyl mercaptan are also approved odorants, although neither is currently being utilized.

LPG is prepared by refining petroleum or "wet" natural gas, and is almost entirely derived from fossil fuel sources, being manufactured during the refining of petroleum (crude oil), or extracted from petroleum or natural gas streams as they emerge from the ground. It was first produced in 1910 by Walter O. Snelling, and the first commercial products appeared in 1912. It currently provides about 3% of all energy consumed, and burns relatively cleanly with no soot and very few sulfur emissions. As it is a gas, it does not pose ground or water pollution hazards, but it can cause air pollution. LPG has a typical specific calorific value of 46.1 MJ/kg compared with 42.5 MJ/kg for fuel oil and 43.5 MJ/kg for premium grade petrol (gasoline). However, its energy density per volume unit of 26 MJ/L is lower than either that of petrol or fuel oil, as its relative density is lower (about 0.5–0.58 kg/L, compared to 0.71–0.77 kg/L for gasoline). As the density and vapor pressure of LPG (or its components) change significantly with temperature, this fact must be considered every time when the application is connected with safety or custody transfer operations, e.g. typical cuttoff level option for LPG reservoir is 85%.

Besides its use as an energy carrier, LPG is also a promising feedstock in the chemical industry for the synthesis of olefins such as ethylene, propylene,

As its boiling point is below room temperature, LPG will evaporate quickly at normal temperatures and pressures and is usually supplied in pressurized steel vessels. They are typically filled to 80–85% of their capacity to allow for thermal expansion of the contained liquid. The ratio between the volumes of the vaporized gas and the liquefied gas varies depending on composition, pressure, and temperature, but is typically around 250:1. The pressure at which LPG becomes liquid, called its vapour pressure, likewise varies depending on composition and temperature; for example, it is approximately 220 kilopascals (32 psi) for pure butane at 20 °C (68 °F), and approximately 2,200 kilopascals (320 psi) for pure propane at 55 °C (131 °F). LPG is heavier than air, unlike natural gas, and thus will flow along floors and tend to settle in low spots, such as basements. There are two main dangers to this. The first is a possible explosion if the mixture of LPG and air is within the explosive limits and there is an ignition source. The second is suffocation due to LPG displacing air, causing a decrease in oxygen concentration.

A full LPG cylinder contains 86% liquid; the ullage volume will contain vapour at a pressure that varies with temperature.